Cariprazine (Synonyms: RGH-188) |
Catalog No.GC15985 |
An atypical antipsychotic
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 839712-12-8
Sample solution is provided at 25 µL, 10mM.
Kinase experiment: | These assays are done in 50 mM Tris (pH 7.4), 100 mM NaCl, 7 mM MgCl2, 1 mM EDTA, and 1 mM DTT. Assay tubes (final volume 250 μL) contain 50 μM (striatum and hippocampus) or 1 μM (D2 and D3 cell membrane) GDP, the ligand to be examined, and membrane suspension (250 μg tissue/tube for the striatum and hippocampus and 20 μg protein/tube for hD2 and hD3 membranes). Samples are preincubated for 10 min at 30°C. After the addition of 50 pM [35S]GTPγS, membranes are incubated for an additional 60 min at 30°C. Nonspecific binding is determined in the presence of 10 μM GTPγS; basal binding is determined in the presence of buffer only. The assay is terminated by rapid filtration through UniFilter GF/B using a harvester, and the membranes washed four times with 1 mL of ice-cold buffer. After drying (40°C for 1 h), 40 μL of Microscint is added to the filters, and the bound radioactivity is determined by a TopCount NXT counter[2]. |
Cell experiment: | Cells are seeded on a 24-well tissue culture plate in 500 μL of medium. Fifty microliters of medium containing 0.55 μCi myo-[3H]inositol is added (final concentration 1 μCi/mL) and incubated for 18-20 h. Cells are then washed three times with buffer containing 140 mM NaCl, 5 mM KCl, 2 mM CaCl2, 5 mM HEPES, 5 mM Na-HEPES, 20 mM glucose, and 10 mM LiCl (pH 7.4). Cells are then incubated for an additional 60 min (37°C) in medium with test compounds alone (agonist test) or alongside 1000 nM (±)-Quinpirole (antagonist test). Medium is then aspirated off, cells are lysed by adding 400 μL of 0.1 M HCl/2 mM CaCl2, and supernatants are frozen at −72°C. After thawing and centrifugation at 1000g for 10 min, 200 μL of each supernatant is loaded on 250 μL of AG1-X8 (formate form) anion exchange column. Effluent is discarded, and columns are washed twice in 1.5 mL of distilled water. IPs are eluted with 2.5 mL of 1 M ammonium formate/0.1 M formic acid directly into scintillation vials, 10 mL of Optiphase HiSafe 3 is added, and the radioactivity is determined in a TriCarb 4900 scintillation counter[2]. |
Animal experiment: | Mice[3] Experiments are performed on wild-type C57Bl/6J mice. In tests of cognitive functions, it is essential to employ concentrations of drugs that have no effects on emotional behavior and that do not impair locomotor activity. Whether Cariprazine (administered at a dose range of 0.005 to 0.15 mg/kg) is first tested affected the behavior of mice in the EPM, a test of anxiety-related behavior that is also critically dependent upon normal locomotor activity. Animals are exposed to an EPM apparatus designed for mice (leg height: 45 cm, arm length: 35 cm, lane width: 5 cm, wall height: 15 cm). Testing (under 100 lux lighting) is performed between 1 and 4 PM. Mice are placed in the center of the maze and their time spent in open arms and the number of closed and open arm entries during a 5 min test period is recorded. Measures of the time spent in open arms and the number of open arm entries served as a measure of anxiety-like behavior. The number of closed arm entries served as a measure of locomotor activity. Rats[4] Adult male Sprague-Dawley rats (150-300 g) are used. Cariprazine is dissolved in 0.9% saline and administered at 0.06, 0.25, 0.5, and 1.0 mg/kg via intraperitoneal (i.p.) injection 1 h before i.c.v. injection of ouabain and daily thereafter for 7 days. Open field activity is assessed immediately following the i.c.v. injection and again after 7 days (the activity is noted 10-14 h after the last i.p. injection of Cariprazine). |
References: [1]. Seneca N, et al. Occupancy of dopamine D2 and D3 and serotonin 5-HT1A receptors by the novel antipsychotic drug candidate, cariprazine (RGH-188), in monkey brain measured using positron emission tomography. Psychopharmacology (Berl). 2011 Dec;218(3):579-8 |
Cas No. | 839712-12-8 | SDF | |
Synonymes | RGH-188 | ||
Chemical Name | 3-[4-[2-[4-(2,3-dichlorophenyl)piperazin-1-yl]ethyl]cyclohexyl]-1,1-dimethylurea | ||
Canonical SMILES | CN(C)C(=O)NC1CCC(CC1)CCN2CCN(CC2)C3=C(C(=CC=C3)Cl)Cl | ||
Formula | C21H32Cl2N4O | M.Wt | 427.41 |
Solubility | ≥ 7.1 mg/mL in DMSO, ≥ 21.05 mg/mL in EtOH with gentle warming, ≥ 3.22 mg/mL in Water with ultrasonic and warming | Storage | Store at -20°C |
General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. |
Prepare stock solution | |||
![]() |
1 mg | 5 mg | 10 mg |
1 mM | 2.3397 mL | 11.6984 mL | 23.3967 mL |
5 mM | 0.4679 mL | 2.3397 mL | 4.6793 mL |
10 mM | 0.234 mL | 1.1698 mL | 2.3397 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >99.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5
(Based on Reviews and 30 reference(s) in Google Scholar.)GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *