PLX7904 (Synonyms: PB04) |
Catalog No.GC10324 |
PLX7904 est un inhibiteur puissant et sélectif de BRAF, avec une IC50 d'environ 5 nM contre BRAFV600E dans des cellules exprimant RAS mutantes.
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 1393465-84-3
Sample solution is provided at 25 µL, 10mM.
IC50: 0.17, 0.53, and 0.16 μM for A375, COLO829 and COLO205 cell lines, respectively.
PLX7904 is a potent and selective BRAF inhibitor.
Oncogenic activation of BRAF leads to cancer growth by constitutively promoting RAS-independent mitogen-activated protein kinase pathway signalling. Therefore, BRAF inhibitors have provided substantially improved treatment of metastatic melanoma.
In vitro: Previous study showed that PLX7904 could inhibit the in-vitro growth of two melanoma cell lines (A375 and COLO829) and an additional human colorectal cancer cell line COLO205 expressed BRAFV600E. The gene expression changes in B9 cells treated with vemurafenib and PLX7904 were compared, and results demonstrated that vemurafenib could alter transcription of 191 mouse genes by at least 1.9-fold, while PLX7904 had minimal effects. Moreover, both vemurafenib and its analogue PLX4720 werer able to stimulate B9 colony formation, whereas PLX7904 was not [1].
In vivo: Animal study showed that both PLX7904 and vemurafenib could produce similar anti-tumour effects in a subcutaneous COLO205 xenograft model with matching doses at 25 mg/kg twice daily and plasma exposures. In addition, when evaluated in vivo, subcutaneous B9-tumour growth was accelerated by vemurafenib but not by PLX7904 when administered at the same dose [1].
Clinical trial: Up to now, PLX7904 is still in the preclinical development stage.
Reference:
[1] Zhang C et al. RAF inhibitors that evade paradoxical MAPK pathway activation. Nature.2015 Oct 22;526(7574):583-6.
Cell experiment: | For MTT assays, 2×103 cells are seeded in triplicate in 96 wells in their regular culture medium (containing PLX4720 for PRT lines). Next day, cells are washed twice with PBS and then the medium is replenished containing the indicated RAF inhibitor. Medium is changed 48 hours later and after a further 48 hours, 10 μL of 5 mg/mL MTT reagent is added to wells, and incubated for three hours. Formazan crystals are then solubilized overnight with a 1:10 dilution of 0.1 M glycine (pH 10.5) in DMSO. Wells are then analyzed at 450 nM in a Multiskan® Spectrum spectrophotometer. Results depicted are normalized to DMSO conditions and are a composite of three independent experiments. Error bars shown are representative of the standard error of mean (SEM). |
Animal experiment: | COLO205 tumour cells are cultured in DMEM 10% FBS 1% penicillin/streptomycin supplemented with bovine insulin, at 37°C. Balb/C nude mice, female, 6-8 weeks old, weighing approximately 18-22 g, are inoculated subcutaneously at the right flank with COLO205 tumour cells (5×106) in 0.1 mL of PBS mixed with matrigel (50:50) for tumour development. The treatment is started when mean tumour size reach approximately 100 mm3, with eight mice in each treatment group randomized to balance the average weight and tumour size. B9 cells are expanded in DMEM 10% FBS 1% penicillin/streptomycin. Upon trypsinization the cells are washed three times with 20 mL RPMI, and after the final centrifugation are re-suspended, counted, and adjusted by volume to a final concentration of 5×107 cells per millilitre. B9 xenografts are started by injection of 5×106 cells subcutaneously in 6- to 7-week-old female nude Balb/c mice. Compound dosing starts when the average size of tumours reach 50-70 mm3. Animals are equally distributed over treatment groups (n=10) to balance the average tumour size and body weight. Animals are dosed orally for days 1-14 twice daily and days 15-28 once daily with vehicle, vemurafenib 50 mg per kg, or PLX7904 50 mg per kg. 12-O-tetradecanoylphorbol-13-acetate (TPA) is put on the skin of all mice twice a week during weeks 3 and 4 at a dose of 2 µg in 200 µL acetone. |
References: [1]. Zhang C, et al. RAF inhibitors that evade paradoxical MAPK pathway activation. Nature. 2015 Oct 22;526(7574):583-586. |
Cas No. | 1393465-84-3 | SDF | |
Synonymes | PB04 | ||
Canonical SMILES | O=C(C1=CNC2=NC=C(C3=CN=C(C4CC4)N=C3)C=C21)C5=C(F)C=CC(NS(=O)(N(CC)C)=O)=C5F | ||
Formula | C24H22F2N6O3S | M.Wt | 512.53 |
Solubility | DMSO: >5mg/ml | Storage | Store at -20°C |
General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. |
Prepare stock solution | |||
![]() |
1 mg | 5 mg | 10 mg |
1 mM | 1.9511 mL | 9.7555 mL | 19.5111 mL |
5 mM | 0.3902 mL | 1.9511 mL | 3.9022 mL |
10 mM | 0.1951 mL | 0.9756 mL | 1.9511 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >98.50%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5
(Based on Reviews and 26 reference(s) in Google Scholar.)GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *