TM-N1324 (Synonyms: Compound 1324, Cpd1324) |
Catalog No.GC31074 |
TM-N1324 est un agoniste du G-Protein-Coupled Receptor 39 (GPR39) avec des CE50 de 9 nM/5 nM en présence de Zn2+ et de 280 nM/180 nM en l'absence de Zn2+ pour le GPR39 humain/murin.
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 1144477-35-9
Sample solution is provided at 25 µL, 10mM.
TM-N1324 is an agonist of G-Protein-Coupled Receptor 39 (GPR39) with EC50s of 9 nM/5 nM in the presence of Zn2+, and 280 nM/180 nM in the absence of Zn2+ for human/murine GPR39.
TM-N1324 activates human GPR39 with high efficacy and potencies of 280 nM and 9 nM in the absence and presence of Zn2+, respectively. TM-N1324 has similar potencies on murine GPR39, 180 nM and 5 nM. TM-N1324 is also found to have promising in vitro ADME properties. TM-N1324 has reasonably good aqueous solubility (65 μM at pH 7.0). Measurements of somatostatin confirms that the GPR39 agonist TM-N1324 increases somatostatin release by 53%[1].
[1]. Frimurer TM, et al. Model-Based Discovery of Synthetic Agonists for the Zn2+-Sensing G-Protein-Coupled Receptor 39 (GPR39) Reveals Novel Biological Functions. J Med Chem. 2017 Feb 9;60(3):886-898.
Cell experiment: | Caco-2 cells are used as an in vitro model of the human intestinal epithelium and permit assessment of the intestinalpermeability of TM-N1324. TM-N1324 is added to either theapical or basolateral side of a confluent monolayer of Caco-2 cells and permeability is measured by monitoring the appearance of the TM-N1324 on the opposite side of the membrane using LC-MS/MS. TM-N1324 (3 µM) is incubated with pooled liver microsomes and incubated at 5 time points over the course of a 45 min experiment finally TM-N1324 is analyzed by LC-MS/MS. The intrinsic clearance (CLint) and t1/2 values for TM-N1324 in humanand mouse microsomes are reported[1]. |
References: [1]. Frimurer TM, et al. Model-Based Discovery of Synthetic Agonists for the Zn2+-Sensing G-Protein-Coupled Receptor 39 (GPR39) Reveals Novel Biological Functions. J Med Chem. 2017 Feb 9;60(3):886-898. |
Cas No. | 1144477-35-9 | SDF | |
Synonymes | Compound 1324, Cpd1324 | ||
Canonical SMILES | O=C1CC(C2=CC=C(F)C=C2Cl)C3=C(N(C4=C5N=CNC5=NC=N4)N=C3C)N1 | ||
Formula | C18H13ClFN7O | M.Wt | 397.79 |
Solubility | DMSO : 6 mg/mL (15.08 mM) | Storage | Store at -20°C |
General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. |
Prepare stock solution | |||
![]() |
1 mg | 5 mg | 10 mg |
1 mM | 2.5139 mL | 12.5694 mL | 25.1389 mL |
5 mM | 0.5028 mL | 2.5139 mL | 5.0278 mL |
10 mM | 0.2514 mL | 1.2569 mL | 2.5139 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >99.50%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5
(Based on Reviews and 11 reference(s) in Google Scholar.)GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *