Sulfo-Cyanine5.5 azide |
カタログ番号GC59218 |
近赤外 (NIR) 蛍光色素である Sulfo-Cyanine5.5 アジドは、アジド官能化 Sulfo-Cyanine5.5 (Ex=678 nm、Em=694 nm) です。
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 2382994-65-0
Sample solution is provided at 25 µL, 10mM.
Sulfo-Cyanine5.5 is a water-soluble, hydrophilic fluorophore which possesses emission in far red area of the spectrum, an analog of Cy5.5®. As other cyanine dyes, sulfo-Cyanine5.5 has an outstanding molar extinction coefficient which gives rise to its bright fluorescence.
The molecule contains four sulfo groups that provide hydrophilicity and negative charge to the fluorophore - this minimizes non-specific binding.
The azide group of sulfo-Cyanine5.5 azide can be conjugated with terminal alkynes in the presence of copper(I) catalyst, or with cycloalkynes in copper free strain promoted reaction.
Cas No. | 2382994-65-0 | SDF | |
Formula | C43H45K3N6O13S4 | M.Wt | 1099.41 |
溶解度 | good in water, DMF, DMSO | Storage | Storage: 24 months after receival at -20°C in the dark. Transportation: at room temperature for up to 3 weeks. Avoid prolonged exposure to light. Desiccate. |
General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. |
Prepare stock solution | |||
![]() |
1 mg | 5 mg | 10 mg |
1 mM | 0.9096 mL | 4.5479 mL | 9.0958 mL |
5 mM | 0.1819 mL | 0.9096 mL | 1.8192 mL |
10 mM | 0.091 mL | 0.4548 mL | 0.9096 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >95.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5
(Based on Reviews and 7 reference(s) in Google Scholar.)GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *