LMPTP INHIBITOR 1 dihydrochloride (Synonyms: LMPTP Inhibitor I, MLS-0322825 Cmpd 23) |
Catalog No.GC19223 |
LMPTP INHIBITOR 1 (dihydrochloride) is a selective inhibitor of low molecular weight protein tyrosine phosphatase (LMPTP), with an IC50 of 0.8 uM LMPTP-A.
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 2310135-46-5
Sample solution is provided at 25 µL, 10mM.
LMPTP INHIBITOR 1 (dihydrochloride) is a selective inhibitor of low molecular weight protein tyrosine phosphatase (LMPTP), with an IC50 of 0.8 uM LMPTP-A.
LMPTP INHIBITOR 1 (dihydrochloride) is a selective inhibitor of low molecular weight protein tyrosine phosphatase, with an IC50 of 0.8 uM LMPTP-A and shows more potent effect on LMPTP-A versus LMPTP-B. LMPTP inhibitor 1 (Compound 23; 10 uM) also enhances HepG2 IR phosphorylation after insulin stimulation in human HepG2 hepatocytes[1].
LMPTP inhibitor 1 is orally bioavailable, and results in appr 680 nM mean serum concentration after treatment of 0.03% w/w, while treatment with 0.05% w/w results in >3 uM; also reverses diabetes in obese mice. LMPTP inhibitor 1 (0.05% w/w) inhibits LMPTP activity, significantly improves glucose tolerance and decreases fasting insulin levels of diabetic DIO mice, without affecting body weight[1].
References:
[1]. Stanford SM1, et al. Diabetes reversal by inhibition of the low-molecular-weight tyrosine phosphatase. Nat Chem Biol. 2017 Jun;13(6):624-632.
Kinase experiment: | Phosphatase assays are performed in buffer containing 50 mM Bis-Tris, pH 6.0, 1 mM DTT and 0.01% Triton X-100 at 37°C. For assays conducted with 3-O-methylfluorescein phosphate (OMFP) as substrate, fluorescence is monitored continuously at λex = 485 and λem = 525 nm. For assays conducted with para-nitrophenylphosphate (pNPP) as substrate, the reaction is stopped by addition of 2X reaction volume of 1 M NaOH, and absorbance is measured at 405 nm. IC50 values are determined from plots of LMPTP inhibitor 1 concentration versus percentage of enzyme activity. For inhibitor selectivity assays, each PTP is incubated with either 0.4 mM OMFP or 5 mM pNPP in the presence of 40 μM LMPTP inhibitor 1 or DMSO. Equal units of enzyme activity, comparable to the activity of 10 nM human LMPTP-A, are used. For the inhibitor reversibility assay, 50 nM human LMPTP-A is pre-incubated with 10 μM LMPTP inhibitor 1 or DMSO for 5 min. The enzyme is diluted 100X in phosphatase assay buffer containing 0.4 mM OMFP and fluorescence is measured at the indicated time points[1]. |
Cell experiment: | Human HepG2 cells are cultured in Eagle’s Minimal Essential Medium (ATCC) containing 10% fetal bovine serum (FBS), 100 U/mL penicillin and 100 μg/mL streptomycin. The absence of Mycoplasma contamination in HepG2 cultures is confirmed using the Lonza MycoAlert Mycoplasma Detection Kit. Cells are treated with 10 μM LMPTP inhibitor 1 in serum-starvation media (0.1% FBS) overnight, following which cells are stimulated with 10 nM bovine insulin for 5 min at 37°C. For detection of IR tyrosine phosphorylation by immunoprecipitation/Western blotting, cells are lysed in radioimmunoprecipitation assay buffer containing 1 mM phenylmethylsulfonyl fluoride, 10 μg/mL aprotinin/leupeptin, 10 mM sodium orthovanadate, 5 mM sodium fluoride, and 2 mM sodium pyrophosphate, and the IR is immunoprecipitated using the anti-IRβ Ab. IR tyrosine phosphorylation of immunoprecipitates is determined by Western blotting with the anti-pIR/pIGFR-Y1162/Y1163 Ab[1]. |
Animal experiment: | Mice[1]LMPTP inhibitor 1 is administered to male B6 or Acp1fl/fl albumin-Cre+ DIO mice at 0.05% w/w in high-fat diet (HFD) rodent chow. Control groups consist of male B6 or Acp1fl/fl albumin-Cre+ littermate mice administered HFD rodent chow alone. Mice are allowed food and water ad libitum and weighed daily. Randomization is not used in these experiments; rather littermate mice are assigned to treatment or control groups in a manner to maintain similar mean body weights between the 2 groups at the start of the study. Insulin-induced liver IR phosphorylation, IPGTT and fasting insulin levels are assessed after treatment. Diabetic (displaying overnight [13 hr] fasting blood glucose levels ≥140 mg/dL) B6 DIO mice are used in experiments to assess IPGTT and fasting insulin levels[1]. |
References: [1]. Stanford SM1, et al. Diabetes reversal by inhibition of the low-molecular-weight tyrosine phosphatase. Nat Chem Biol. 2017 Jun;13(6):624-632. |
Cas No. | 2310135-46-5 | SDF | |
Synonyms | LMPTP Inhibitor I, MLS-0322825 Cmpd 23 | ||
Canonical SMILES | O=C(N(CC)CC)C1=CC=C(C2=NC3=CC=CC=C3C(NCCCN4CCCCC4)=C2)C=C1.Cl.Cl | ||
Formula | C28H38Cl2N4O | M.Wt | 517.53 |
Solubility | DMSO : ≥ 64 mg/mL (123.66 mM) | Storage | Store at -20°C |
General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. |
Prepare stock solution | |||
![]() |
1 mg | 5 mg | 10 mg |
1 mM | 1.9323 mL | 9.6613 mL | 19.3226 mL |
5 mM | 0.3865 mL | 1.9323 mL | 3.8645 mL |
10 mM | 0.1932 mL | 0.9661 mL | 1.9323 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >99.50%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5
(Based on Reviews and 6 reference(s) in Google Scholar.)GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *