Semotiadil recemate fumarate |
Catalog No.GC32539 |
Semotiadil recemate fumarate is the recemate of Semotiadil fumarate.
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 123388-25-0
Sample solution is provided at 25 µL, 10mM.
Semotiadil recemate fumarate is the recemate of Semotiadil fumarate. Semotiadil fumarate is a novel vasoselective Ca2+ channel antagonist.
Semotiadil in a concentration of 1 μM produces an inhibition of 12.4±9.7% and in a concentration of 10 μM an inhibition of 25±11.0%[1]. Effects of Semotiadil on the voltage-dependent Ca current (ICa) are investigated in dispersed smooth muscle cells of the rabbit portal vein. At a holding potential of -100 mV, Semotiadil (> or =0.1 μM; dissolved in DMSO) inhibits the ICa in a concentration-dependent manner (IC50=2.0 μM). At a holding potential of -80 mV or -60 mV, the concentration-inhibition curve observed in the presence of Semotiadil is shifted to the left compared with that observed at -100 mV; and Semotiadil shifts the voltage-dependent inactivation curve to the left. The curve for the decay of ICa is fitted with two time constants. Semotiadil (<1 μM) reduces the slow but not the fast time constant. The curve for the recovery from ICa inactivation also consisted of two time constants, and Semotiadil (1 microM) prolongs the slow recovery. Semotiadil dissolved in deionized water more potently inhibits ICa than Semotiadil dissolved in DMSO[2].
Semotiadil fumarate, a novel benzothiazine calcium antagonist, is given alone or in combination with either Enalapril or trichlormethiazide to conscious, spontaneously hypertensive, rats daily for 2 weeks. When given alone, the antihypertensive effects of Semotiadil (10 mg/kg, p.o.) and Enalapril (5 mg/kg, p.o.) first became apparent after the 3rd dose and thereafter the effects appeared to develop daily although this effect had waned by the time of the next dose. These results indicate that combined daily dosing of Semotiadil, especially with Enalapril, each at relatively low doses may be able to control hypertension in a continuous manner[3].
[1]. Koidl B, et al. A novel benzothiazine Ca2+ channel antagonist, Semotiadil, inhibits cardiac L-type Ca2+ currents. Eur J Pharmacol. 1997 Mar 19;322(2-3):243-7. [2]. Teramoto N. Mechanisms of the inhibitory action of Semotiadil fumarate, a novel Ca antagonist, on the voltage-dependent Ca current in smooth muscle cells of the rabbit portal vein. Jpn J Pharmacol. 1993 Mar;61(3):183-95. [3]. Ichikawa M, et al. Antihypertensive effects of a novel calcium antagonist, Semotiadil fumarate (SD-3211), alone and in combination with Enalapril or trichlormethiazide in spontaneously hypertensive rats. Biol Pharm Bull. 1994 Nov;17(11):1513-5.
Kinase experiment: | Semotiadil is dissolved in DMSO. Appropriate dilutions are made freshly for each experiment[1]. The experiments are performed in an experimental bathing chamber (volume 1 ml) mounted on the stage of an inverted microscope. The cells are superfused with warm (37°C) extracellular solution at the rate of 3 mL/min. The solution could be exchanged for an identical solution containing the substance under study without any significant alteration either in the flow rate or in the temperature of the superfusing fluid. A complete exchange of the bath solution was achieved within 1 min[1]. |
Animal experiment: | Rats[3] Semotiadil fumarate is given alone or in combination with either Enalapril or trichlormethiazide to conscious, spontaneously hypertensive, rats daily for 2 weeks. Systolic blood pressure and heart rate are recorded 24 h before the start of the regimen and then every 2 and 24 h after the 1st, 3rd, 7th, 10th and 14th doses. When given alone, the antihypertensive effects of Semotiadil (10 mg/kg, p.o.) and Enalapril (5 mg/kg, p.o.) first became apparent after the 3rd dose and thereafter the effects appeared to develop daily although this effect had waned by the time of the next dose. |
References: [1]. Koidl B, et al. A novel benzothiazine Ca2+ channel antagonist, Semotiadil, inhibits cardiac L-type Ca2+ currents. Eur J Pharmacol. 1997 Mar 19;322(2-3):243-7. |
Cas No. | 123388-25-0 | SDF | |
Canonical SMILES | O=C(O)/C=C/C(O)=O.O=C1C(C2=CC(OC)=CC=C2OCCCN(CCOC3=CC=C(OCO4)C4=C3)C)SC5=CC=CC=C5N1C | ||
Formula | C33H36N2O10S | M.Wt | 652.71 |
Solubility | Soluble in DMSO | Storage | Store at -20°C |
General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. |
Prepare stock solution | |||
![]() |
1 mg | 5 mg | 10 mg |
1 mM | 1.5321 mL | 7.6604 mL | 15.3207 mL |
5 mM | 0.3064 mL | 1.5321 mL | 3.0641 mL |
10 mM | 0.1532 mL | 0.766 mL | 1.5321 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >98.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5
(Based on Reviews and 8 reference(s) in Google Scholar.)GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *